Packard Performance Tunes

  • Eco key in sport mode = Fuel-friendly tune (15-20 hp gains)
  • Sport key in eco mode = Pump gas race-ready (20-25 hp gains)
  • Sport key sport mode = Race gas/race-ready (25-30 hp gains)
  • Fueling revised for maximum power and torque
  • Spark timing optimized for 91-93 octane fuel
  • Rev limit raised in high and low gears
  • Speed limit raised in high and low gears
  • Torque limiting functions reduced or eliminated
  • Revised drive-by-wire throttle  profiles for high and low gears
  • Lower fan turn-on temps
  • Raises boost pressure


  • 3" stainless pipe
  • Tip to tail turbo-back w/resornator
  • Stainless steel muffler
  • Gasket not needed, mounted with V-Band
  • V-Band clamp 1pc. The OEM V-Band currently on your SXS will be used. (We are aware the pic shows two, updated pic coming soon)
  • Billet muffler mount w/2 - 5" t-bolt clamps
  • O2 bung for stock applications (two bung options available)
  • 10 - 15 hp gain over stock


Packard Performance has been developing aftermarket performance systems for nearly 25 years. Dirt, or pavement our exhaust systems do not discriminate. You will get the increase in horsepower and torque you are looking for with an aggressive sound that can’t be duplicated.

Intended for track use only. 

DynoJet PowerVision will fit 2017-2019 CAN-AM X3 models. The Dynojet Performance tune is included with this tuner. It works on the Turbo R models. 

Your CAN-AM  Maverick X3 is now a flash away from dominating the competition by unlocking the hidden power and torque that lurks within.  The Power Vision PV3 interfaces with the ECU through the diagnostic connector and allows you to flash new tunes, view live data and log data to the on-device memory. 

Dynojet tunes are available and have modified boost, fueling, timing, rev limit, idle, and other changes to extract the maximum performance out of your vehicle. Shops, tuners, and advanced users are enabled to further optimize with the included Power Core software.  This powerful software suite provides all the tools to perform custom tuning, view and analyze data logs, and automate corrections using Tune Lab.