Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
Swaged tube tie rods use:
14 mm outer tie rod ends
Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads
65% larger housing than stock
Over 50% less wear than OEM after 15,000 cycles
Grease fitting for rack gears
RackBoss® 2.0 Does What Other Racks Can’t Every rack eventually wears down, gets sloppy, and makes your steering and responsiveness feel like crap. Or at least every rack did until RackBoss® 2.0. We took our original RackBoss and upgraded it to be the strongest, most durable rack on the market. It’s also made with our X24 Tech—a dual-bushing design you can’t get anywhere else. It reduces the wear you’d see on stock by over 50%. With SuperATV’s RackBoss® 2.0 Rack and Pinion installed on your Polaris RZR XP 1000, you can run massive tires and tackle deadly terrain. You can ride the way you want every day for years and quit worrying about your rack.
Minimizes Wear and Tear with Our Dual-Bushing Design We use a dual PTFE bushing design to prevent the wear and tear that you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss® 2.0 can power through bigger hits with larger tires without getting sloppy steering. You get like-new operation that lasts longer than any other RZR 1000 steering rack. Plus, the built-in grease fittings allow you to push out all the crud that can get in when you go hard in mud or water. It’s only possible with RackBoss® 2.0.
Swaged Tube Tie Rods Our steel swaged tube tie rods are lightweight but strong. Our swaged design significantly improves the strength of the 7/8” diameter tubing. They feature rebuildable inner ball and sockets that use beefy 14” rod threads and 16 mm rack threads. They’re paired with 14 mm outer tie rod ends to make sure the weak points are as strong as possible. They’re perfect for the casual rider that’s tired of their stock performance.
Solid Steel Bar Tie Rods Solid steel bar tie rods give you the robust strength you need to ride through rough terrain. They’re perfect for turning big tires through slop and navigating boulder fields. The 1” diameter steel rod is paired with beefy tie rod ends—3/4” outer tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. All that strength lets you get wild.
Billet Aluminum Hex Tie Rods If you want the strongest, lightest, and best looking tie rods for your RZR 1000, you want our billet aluminum hex tie rods. The polished billet construction is big and beefy, giving you the long-term durability you want without adding a ton of weight. They come complete with our oversized 3/4” outer tie rod ends and rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads. For the biggest builds, hardest rides, and neck-turning good looks, these are the tie rods for you.
Patent No. 11,345,393
RackBoss 2.0 Swaged Tie Rod
RackBoss 2.0 Solid Steel Tie Rod
RackBoss 2.0 Billet Tie Rod
X24 Tech Dual-Bushing Design
Inner Ball and Socket Thread Diameter
14 mm rod threads, 16 mm rack threads
3/4” rod threads, 16 mm rack threads
3/4” rod threads, 16 mm rack threads
Outer Tie Rod End Thread Diameter
Tie Rod Material
Solid steel bar
6061 Billet aluminum
Steering Stop Kit
Misalignment Bushings, Tie Rod Studs, & Hardware
WARNING:This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠California Proposition 65 Warning⚠ WARNING:This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Polaris RZR XP 1000 : 2014-2023
Polaris RZR XP 4 1000 : 2014-2023
Replaces OEM Part #: 1824205, 1824469, 1823984, 1824339 and 1824747
You may also like